The Atlas is suitable for beginning to intermediate pilots. In terms of comfort, ease-of-use and safety, the Atlas sits at the lower end of the EN B class. Yet the climb and glide performance in challenging conditions is ideal for long XC flights and has to be experienced to be believed.

Optimized (EPT) airfoil for stability and performance

EPT (Equalized Pressure Technology) uses numerical analysis to perform airfoil modifications in order to find the best solution possible. The result is a wing that inflates more easily, climbs better in thermals and is more stable in turbulence and at speed. In addition, the glider has a lower stall speed and reduced deep stall tendency. Overall, the result is an airfoil with inherently lower drag that simply flies better in all aspects.

Exceptional handling for efficient climbing

The handling of the Atlas strikes a perfect balance. It’s comfortable and reassuring, yet gives you enough feedback to accurately feel the air. The wing helps you find the thermals with its excellent seeking behavior, and when you enter a thermal it cuts through the air and stays solid above your head.

Long and progressive brake travel for a wide safety margin

The Atlas has a long and progressive brake travel. The wing responds to small brake inputs with precision, yet is forgiving if you pull the brakes over-enthusiastically. The brake travel of around 80cm and extremely high brake pressure approaching the stall point makes it virtually impossible to accidentally stall the wing. The Atlas also retains its energy even when flown quite slowly—an advantage when you want to land in a tight spot, or maximize your climb rate.

Also certified with cocoon harness

Almost all EN B gliders are tested with standard harnesses. If you fly with a cocoon harnesses, it can cause issues for the stability of your wing. This is why we made an additional EN test with the combination of the Atlas and the GIN Genie Lite cocoon harness. The Atlas test results were identical with both the cocoon harness and the standard harness. So when you fly with the combination of the Atlas and Genie Lite, you are guaranteed peace of mind.

Extended weight range

The Atlas is remarkably stable and, even when highly loaded, shows good performance and the same excellent recovery characteristics. For this reason, we decided to certify the wing with an extended weight range for experienced pilots who want to fly with a higher wing loading. For general flying, the Atlas can be flown comfortably over the whole of the normal weight range according to your preference.

Technical details

•  Optimized airfoil with Equalized Pressure Technology (EPT) for stability and performance
•  Reduced line consumption: 3 risers / 2 main lines spanwise
•  New internal construction with cross spar maintains even sail tension
•  Nylon rods in top sail trailing edge minimize sink rate and improve acceleration
•  New low friction rings on the brake lines provide smooth operation and prevent twisting
•  Split ‘A’ risers for easy big ears
•  Mini-ribs on the trailing edge improve handling and performance
•  Kickdown speed system with Ronstan pulleys
•  Gathering (reefing) system on the trailing edge
•  Nylon rods are soft, shape-retaining and durable, but can be easily replaced if necessary


Canopy cloth

Top surface leading edge: Dominico 3RS
Main top surface: Dominico 2RS
Bottom surface: Dominico 2RS
Ribs: Porcher Skytex 9017 E29


Upper: LIROS DSL70, PPSL120, GIN TGL80
Middle: LIROS DSL70, PPSL120, PPSL160, GIN TGL145

 FLAT  AREA 23.09m2 25.14m2 27.28m2 29.51m2 31.82m2
 SPAN 10.96m 11.43m 11.91m 12.38m 12.87m
 A.R 5.21 5.21 5.21 5.21 5.21
 PROJECTED  AREA 19.9m2 21.67m2 23.51m2 25.43m2 27.42m2
 SPAN 8.76m 9.14m 9.52m 9.90m 10.28m2
 A.R 3.86 3.86 3.86 3.86 3.86
 CELL NUMBER 47 47 47 47 47
 GLIDER WEIGHT 5.2kg 5.6kg 5.9kg 6.3kg 6.7kg
 RECOMMENDED WEIGHT IN FLIGHT 65-85kg 75-95kg 85-105kg 95-116kg 105-125kg